3 Common Mistakes to Avoid when Adding Hot Tub Chemicals

3 Common Mistakes to Avoid when Adding Hot Tub Chemicals

A hot tub is one of the most rewarding investments you can make. If you are like most owners, you have a maintenance kit ready with a variety of hot tub chemicals on hand. There are plenty of dangers and risks to the overall condition of your hot tub if you’re not careful with your chemicals. This guide will cover the most common mistakes with hot tub chemicals, to ensure the safety and longevity of your hot tub.

Using Poor Quality Hot Tub Chemicals

Avoid using harsh chemicals when cleaning your hot tub, as cheaper brands may ultimately worsen the condition of your tub and its electrical components. Check with your manufacturer to see which cleansers are safe to use on your new tub.

Not Keeping The Cover Off

Some owners add chemicals into their hot tub and immediately put their cover back on. However, to get the best results, you’ll want to give your hot tub breathing room by leaving the cover off for at least 15 minutes after adding any chemicals. Sanitizers such as chlorine and bromine require this, to better defend against bacteria, viruses, algae, and other contaminants from forming in your water. Chemicals like shock also require this to circulate, oxidize, and clean your pool when its sanitizer is overworked.

Not Testing Beforehand

An important thing to keep in mind when it comes to hot tub chemicals is that you need to use test strips at home to make sure your pH and Alkalinity levels are balanced. pH balancers are used to maintain a healthy pH range in your tub, while Alkalinity Balancers are used to maintain a safe total alkalinity range for a comfortable experience. The process can be frustrating and daunting to take on, but fortunately with smart water monitors like pHin, you can balance your hot tub water a lot easier than before.

Latest Posts

Load more posts