How Does Rain Affect Your Swimming Pool?

Part of owning a pool or hot tub is learning to deal with everything Mother Nature might throw at you. While regular pool maintenance can keep your water pristine, the elements aren’t subject to any routine. Most people think about things such as snow and dust storms, but rarely do they consider rain to be an aspect of nature they should worry about. The reality is that rain affects your pool or hot tub in multiple ways. However, this doesn’t necessarily mean that rain is detrimental to your pool; it can be good or bad.

Rainfall and Water Chemistry

The water chemistry of a pool is very important; it needs to maintain the proper chemical levels to remain safe and comfortable for those that use it.

Rain can be acidic, so it can offset both your pH and alkaline levels. A pool should have a pH balance of 7.4 to 7.6, while some rainwater has a pH balance around 5.0, so heavy rainfall could lower the pH balance of the pool. However, while rainfall may distort your pH levels, it can also help dilute chemicals that cannot be treated with other chemicals and need to be diluted. The downside to this is that rain does not pick and choose which chemicals it will dilute. The result is that it affects every chemical in the pool.

That said, note that, although a heavy rain, or extended period of rain, may have an effect on your pool or hot tub, you don’t need to worry too much about light rain, except for the algae spores which may wash or blow into your pool.

Rainfall and Debris

Rain seldom brings just rain; it usually comes with wind and anything the wind decides to pick up along the way. A good rainstorm typically brings along pollen, dust, algae spores, trash, and other organic matter, covering the surface and bottom of your pool. Not only this, but dirt and debris can clog your filter and pumps, making it more difficult to clean any other debris from the pool.

If any bushes or trees surround your pool, its susceptibility to contaminants is even greater, as they can throw leaves, branches, and oils into the water. However, perhaps the biggest concern when it comes to rain and your pool is algae. Rainstorms that bring in pollen and other plant matter, or even just disrupt your chemical balance, can promote the formation and spread of algae. It can be difficult to remove and repair any damage caused by algae growth, especially if left untreated for any period of time.

Excess Water

One of the biggest problems caused by rain is the accumulation of extra water. While this might seem like a given, excess water due to rainfall causes multiple problems. Heavy rainfall has the potential to cause flooding in any area, but if there’s already a large body of water in the backyard then your chances of flooding increase. This can lead to extra runoff or debris in your pool and even flood necessary pool equipment, such as filters and pumps. A heavy rain can also cause the water level in your pool to rise rendering your surface skimmer useless in effectively skimming the surface debris to the skimmer basket, meaning you’ll need to drain it back to the proper level.

Storm Prep and Repair

If you know ahead of time to expect rain, prepare by setting up your pool cover ahead of time. This keeps most of the debris out of the water. You should also store any loose items surrounding the pool, such as patio furniture, pool toys, and potted plants. This keeps them from blowing into the pool. Finally, turn off the pump.

Once the storm ends, turn the pump back on and remove the cover as carefully as possible. There is no sense in dumping all that debris into the water. Also, empty the skimmer and pump baskets. If you don’t have a lot of debris at the bottom of the pool AND it took on a lot of water, go ahead and pump out the excess. If you do need to vacuum, hold off on dumping the excess water until after vacuuming.

Next, clean the pool as per usual: skim the surface, brush the walls and floor, and run the vacuum. Finally, test the chemical balance and make any necessary adjustments.

If you’re looking for an easy way to ensure the water in your pool or hot tub stays balanced, consider a pHin smart monitor. This little device constantly monitors your water and automatically sends you exactly what you need to keep the water in your pool and hot tub healthy. If you’re looking for someone to service your equipment, Pool Service on Demand instantly connects you to local, qualified pool techs.

When is the Right Time to Open Your Swimming Pool?

With many parts of the country still experiencing cold weather and snow, it might seem like a strange time to think about opening your pool. Many pool owners debate the optimal time to open their pool. Often, the conclusion is that, if the water isn’t warm enough for swimming, then it’s okay to wait. Not true.

Spring and the warmer temperatures it brings can sneak up on you, wreaking havoc on your pool. It is often better to prepare for swim season earlier rather than later. Here are a few guidelines to help you open your pool at the optimal time.

When to Open Your Pool

There is no definitive date as to when you should open your pool. It varies from place to place, so the best thing to do is pay attention to the weather. The recommended time to open up your pool is when temperatures in your area consistently hit 70 degrees. While 70 degrees isn’t exactly swim weather, these temperatures can promote algae growth. This can be especially problematic if you use a mesh pool cover, as the water will get plenty of sunlight. Another thing to keep in mind as the weather warms is the growth season, which can bring pollen into your pool. However, with your filter and pump running, you can prevent algae growth and pollen collection, making sure your pool stays a pool instead of turning into a backyard swamp.

Opening Heated Pools vs. Non-heated Pools

When it comes to a heated pool versus a non-heated pool, the consensus for opening either remains the same. However, 70 degrees may only be maintenance weather for a non-heated pool, while it can be swim weather for a heated one. This doesn’t mean you should open a heated pool earlier, however. Freezing temperatures and snow can still affect a heated pool. It is still ideal to wait for consistent 70-degree weather before opening your pool, even if it is heated.

Watching the Weather

As stated, weather consistency is important when it comes to opening your pool. You don’t want to open your pool after a few days of warm weather, only to receive heavy snowfall the next day. We’ve already seen temperatures rise for a day or two and then plummet in places like Chicago and New York, so make sure that the warm weather is there to stay. Keep an eye on your local weather forecast to help determine the right time to open your pool. Put history on your side as well by noting the average temperatures in your region by month. If the averages temperature for a certain time of year is 55 degrees, yet it has surpassed 70 for the last week, it’s best to avoid assuming that the great weather is there to stay.

Things to Consider

When deciding whether it’s the right time to open your pool, keep the following things in mind:

  • Expenses: Opening a pool too late can cause the need for extra cleaning and maintenance before use. Consider the cost of the additional chemicals to properly clean and prepare your pool.
  • Aesthetic: Keeping your pool covered can prevent your yard and landscaping from looking their best. Think about how much better it would look to have a clean, open pool.
  • Use: Whether your pool is heated or non-heated, it is ideal to open it at least three weeks before you intend to use it. It is important that your water is clean and clear before swimming.

If you’re looking for an easy way to ensure the water in your pool or hot tub stays balanced no matter what time of year it is, consider a pHin smart monitor. This little device constantly monitors your water and automatically sends you exactly what you need to keep the water in your pool or hot tub healthy. If you’re looking for someone to service your equipment, Pool Service on Demand instantly connects you to local, qualified pool techs.

How Unhealthy Pool Water Can Spell Disaster for Your Wallet

How Unhealthy Pool Water Can Spell Disaster for Your Wallet

Proper maintenance of your pool or hot tub is fundamental to ensuring the health and safety of those who use it. Avoiding murky water, algae bloom build-up, and pH imbalance is a difficult, and often confusing process. The basic chemical components involved in keeping your water healthy are a sanitizer, pH adjusters, shock and a mineral purifier that prevents algae growth. Additionally, knowing when, where, and how to apply these chemicals to your pool can be a real challenge, especially when there might be eager swimmers waiting to dive in.

Preventative maintenance is particularly important in keeping your pool or hot tub in a healthy state. Neglecting the chemical balance of a pool can be detrimental to its health. Inaction can exacerbate existing water safety issues and lead to extremely high costs associated with remedying the condition of the pool water later on. Abnormally high or low temperatures can further complicate this already arduous process, as compensation for unusual temperature conditions requires additional chemical adjustment. Ultimately, maintaining your pool properly can be a laborious process.

Out-of-Balance Water, Out-of-Pocket Expense

Common pool care mistakes can substantially reduce the lifespan of your pool. According to an CNBC article, they may cut it by as much as 50%! Not to mention the cost to replace the damaged equipment or fix the pool itself. For example, a heater attacked by corrosive, acidic water can cost over $2,000 to replace. Resurfacing your pool can cost $4,000 and more to replace. A pool or hot tub with a high pH can create a scale-forming water condition, which can cause rough surfaces from the mineral deposits coming out of solution and scale deposits building up in the plumbing and equipment. Again, this can cost hundreds to thousands of dollars to remedy.

A Well-Maintained Pool Gives You Peace of Mind…And Your Wallet A Break

Typically, pool or hot tub care is a demanding and equally exhausting experience. If not maintained properly, a pool can end up harming swimmers as well as the pool owner’s wallet. Preventative care is necessary to escape the hardship of an unhealthy and imbalanced pool. Luckily, pHin is here to help. pHin monitors your water chemistry and temperature 24/7 so you don’t have to. It notifies your smartphone when action is needed and even tells you how to keep your water perfectly balanced all year long.

pHin chemical subscription members can enjoy the added convenience of single-dose, pre-measured chemicals delivered to your door so you can only add what you need. Your Starter box comes with the smart monitor, free mobile app, wireless bridge and even a mineral purifier* to reduce the amount of chemicals needed to balance your water. Just the mineral purifier alone retails for over $60. Our pool experts estimate that using the pHin smart water care solution with its unique chemical delivery membership can can help you save 1/3 of your annual cost.**

ORDER YOUR pHin NOW!

*Pool subscription members only.

**Estimate is based on annual pHin monitoring, recommendations and door-to-door chemical delivery for chlorine pools. Your estimated savings will depend on which pHin solution you choose.    

Your Guide to Opening Your Swimming Pool

Your Guide to Opening Your Swimming Pool

With parts of the country still experiencing snow and freezing temperatures, the thought of opening your pool may be the furthest thing from your mind. However, the warm temperatures of spring arrive before you know it, and they wreak havoc on your pool. It makes sense to prepare for swim season early.

When the weather warms up into the 70’s or warmer, using the following guidelines to walk you through opening your pool for the new swim season.

Step 1: Clean the Cover

If you use a winter pool cover, the first step is clearing it of debris and standing water.

For a significant amount of water, use a submersible cover pump. However, do not set it in place and walk away. You need to stop the pump while a small amount of water remains on the cover; otherwise, your pump can burn out. Unless you want to dump a bunch of debris-filled water into your pool, do not remove the cover with standing water on it.

To remove debris, use your pool brush, skimmer net, or a leaf blower.

Step 2: Remove and Clean the Pool Cover

Once you clear the cover, remove it from the pool. Next, lay it flat on the ground and wash it, using a mild soap, water, and soft brush or cloth. Before storing the cover for the swim season, allow it to dry completely.

Step 3: Check and Adjust the Water Level

Check the pool’s water level. Ideally, it reaches the midway point on the skimmer. If it’s too low, add water using your garden hose.

Step 4: Reconnect the Plumbing

If you installed winter plugs, go ahead and remove them now. Don’t be worried if you see air bubbles, as they just mean that you did a good job clearing the lines when you closed the pool for winter.

Step 5: Reinstall Your Accessories

If you removed your an automatic pool cleaner, diving board, ladder, slide, or any other pool accessories, reinstall them now. To protect them from rusting, take the time to lubricate the bolts first.

Step 6: Replace the Pump Parts

Replace the drain plugs on your pump. If it has a multiport valve, you also need to replace the air bleeder, pressure gauge, and sight glass before turning the valve to Filter. Finally, look at the housing’s o-ring. If you see damage, such as cracking, replace it.

Step 7: Clean the Filter

You want to clean the filter before switching on the pump. If it’s a cartridge filter, remove it and wash it with the garden hose. You need to take apart a D.E. filter to clean it, and then reassemble it. If you have a sand filter, set the pump to backwash to clean it and then return it to the normal setting.

Step 8: Turn It On

It is now time to turn your pump back on, check for leaks, and make sure it pulls in water. If the pump doesn’t pull in water, priming it should help. Shut off the system and take off the lid. Fill the housing with water, close the lid again, and turn the pump back on.

Step 9: Clean the Pool

Grab your skimmer net and pool brush. First, skim any debris from the water’s surface. Next, thoroughly brush the pool, starting at the tile line and brushing straight down toward the drain.

Step 10: Check the Chemicals and Shock It

Take a water sample and check the chemical balance, adding the requisite chemicals. It’s also a good idea to shock the pool when you first open it. Then, let the pump run for 24 hours, vacuum it again, and retest the chemistry.

When to Open Your Pool

Unfortunately, climate differences across the country make it impossible to provide a definitive date on which to open your pool. Instead, we recommend paying attention to the weather in your area and opening your pool once temperatures regularly hit 70 degrees or warmer.

This is not your guideline for swim season, unless you have a heated pool. However, even though 70-degree days aren’t warm enough for swimming, those temperatures do promote algae growth. If your filter and pump aren’t running, the result is a green, swampy mess.

Another challenge once the weather warms is pollen, since warming temperatures indicate that plant growth is in full swing. Again, with your pump running, that pollen cycles through no problem. Without it, swamp time.

3 Lesser-Known Signs That Your Pool Water Is Out Of Balance

3 Lesser-Known Signs That Your Pool Water Is Out Of Balance

How do you know if your swimming pool is just a little gross, or a real health hazard?

Signs Your Water is Out of Balance

There are obvious, common signs we all know alerting you that the water in your pool or hot tub may be out of balance. These signs include strong signals such as a green mess of algae or the strong, burning aroma of too much chlorine. Then there are other signs that are not so obvious, but simple to catch if you are aware! Here are 3 lesser-known signals to watch for.

1) Cloudy or discolored water

Cloudy or discolored water is one of the first signs that the right amounts of chemicals aren’t in the pool.

2) Frequently adding water

It is important to keep an eye out for leaks. If you find yourself adding water to your pool frequently, that can dilute your pool water chemistry and eventually damage the plumbing.

3) Clear or pink slime

Look out for any clear or pink slime, especially if you use a garden hose to add water to your pool. A hose is the perfect environment for nasty slime to develop and filling your pool with a hose will transfer it right into your pool.

Damage to the Pool

Obviously no one wants to swim in cloudy, discolored or slimy water. The pools at the Rio Olympics turned bright green when the wrong chemicals were added, mixed with chlorine, and allowed algae to grow overnight. Unbalanced pool water like that is pretty gross to swim in and it can damage the pool itself, leaving stains on the pool’s surfaces or causing corrosion in the plumbing, as well as to any ladders, handrails, or pumps. And that can lead to costly repairs in the future.

If you want to avoid all of these hassles and ensure the water in your pool or hot tub stays balanced, consider a pHin smart monitor. This little device constantly monitors your water and automatically sends you the exact chemicals you need to keep the water in your pool and hot tub healthy. If you need someone to service your equipment, Pool Service on Demand instantly connects you to local, qualified pool techs.

 

Simple Fixes for Common Plumbing Problems in Your Pool

Part of owning a pool or hot tub means taking care of any problems that might occur, preferably while it’s still early days and the problem is easy – and inexpensive – to fix. While some issues, such as chemical balance, are simple to understand and correct, dealing with plumbing problems confuses most people.

Plumbing issues in particular require swift action. Waiting leads to further damage and expensive repairs. While fixing a plumbing problem may seem daunting, there are simple solutions to common plumbing problems pool owners experience.

Air in the System

Any air in your pool system can be a serious issue, as it restricts water flow. This may cause cloudiness in the pool or even lead to the filter tank bursting due to pressure build-up, which may not be apparent when viewing the filter pressure gauge. One symptom of an air leak in your system is when streams of air bubbles come from the water inlets into the pool. There are a few things that might cause air to enter your system, all of which have a simple remedy.

Check the water level of the pool, as a low water level can cause the surface skimmer to pull in air. If low water is the only issue, refill the pool to the proper level. Speaking of the surface skimmer, another component to inspect is the skimmer weir. The weir is the “flapper door” inside to mouth of the skimmer. It’s purpose is to actually create the “skimming action” by free-floating on the uppermost surface of the pool water level. The weir can become faulty and stick in the mouth closed position, literally creating a dam effect inhibiting the flow of water.

Other common causes can be the circulation pump and valves, typically located on the suction side and in front of the pump. The circulation pump has a hair and lint strainer pot with a cover and gasket / o-ring. When the gasket o-ring becomes flattened or the cover becomes damaged (cracked or warped), it can break the airtight seal, allowing air to flow into your filtration system. For valves, a cover is sealed by a gasket or o-ring and may begin to leak, the lid can warp or crack and let in air.

To determine if the circulation pump or a valve is the culprit of your air leak, start up the system and relieve any existing air by opening up the air bleed valve on top of the filter tank. Once the gauge has achieved the expected pressure, turn off the system and watch the pump area. If there is a small spray of water in any of these areas, then you pinpointed the leak. From there, replace all necessary parts and remember that you should never let an air leak go unattended.

Dirt and Debris

Dirt and debris is at the forefront of every pool owner’s mind, though usually in the form of thinking about cleanliness and water chemistry. However, dirt and debris can enter the plumbing and cause problems for you and your pool. Debris entering the filtration system can cause clogs or even wedge itself in valves and covers, letting in air. If the filter or strainer is clogged with debris, clean the strainer, then backwash the filter or change the cartridge. Dirt and debris may also clog the skimmer line, so your pool filter fails to work properly. If this is the case, turn off the pool pump and (if possible) the power to the motor. Clear any existing debris from the basket and use a plumbing snake designed for the particular type of plumbing to remove the clog from the skimmer’s piping.

Changes in Filter Pressure

The filter in your pool or hot tub must work perfectly to ensure optimum water safety.  A change in filter pressure is a common problem that, luckily, has an easy fix. Decreases in filter pressure are usually caused by clogs, trapped air, or incorrect valve settings. This can be remedied by checking valve settings, clearing suction lines, or replacing damaged hardware. Increases in filter pressure are usually caused by something blocking the filter, such as debris or an algae bloom blocking inside the filter. This can be prevented with regular pool cleanings and consistently clearing your pool of algae.

A pHin smart monitor helps ensure the water in your pool or hot tub stays perfectly balanced. If you prefer to hire professionals for your plumbing issues, check out Pool Service on Demand, where you can connect with qualified, local pool care professionals.