Prep Your Pool for Winter Hibernation

Homeowners in Northern, cooler states are expecting temperatures to drop over the next few weeks. When the first autumn leaves fall, it’s time to start closing your pool for the season – A general rule of thumb is to wait until outdoor temperatures start to steadily fall below 65 degrees. To avoid damage or other issues next pool season, follow these steps and precautions:

  1. Clean the Pool

Before it can be closed, you’ll want to get your pool as clean as possible. Using a vacuum or skimmer, make sure there are no leaves or other debris floating in the water. The pool walls and stairs should be scrubbed with a brush to break up any algae build up. You’ll want to get your pool as clean as possible before it’s closed for the season.

  1. Lower the Water Level

As you’re getting your pool ready for the off season, drain water to avoid problems with ground water and temperature levels if/when they drop below freezing. How much water should you drain? That depends on the climate of the area you live in. If temperatures are generally cold in the winter, you’ll want to drain the water 4 to 6 inches below the tile line to avoid any potential issues with freezing water.

  1. Check and Clean Filters

Even through the winter, check on your filters regularly to make sure they are running properly and keeping the water clean and safe. Pool filters help remove debris from the water but can’t do their job properly if they aren’t cleaned regularly. You’ll be thankful later – this step will help to preserve the lifespan of the filter system and keep your pool clean during the off season for an easier opening in the spring.

  1. Adjust Chemical Levels

Before you close your pool for the winter, test the water’s chemistry levels and get it balanced. Closing your pool with unbalanced levels will make it difficult to open it up the next season. For help checking and correcting the balance, you can turn to pHin. The pHin Smart Water monitor will help you understand if your pool is balanced with color coded discs. pHin’s simplified chemical dosing instructions will help you understand how much of each chemical needs to be added to get the water balanced.

  1. Set to Winterize

pHin has a special setting for winter: Pool owners can get their monitor and pool ready for hibernation by tapping on the “subscription” icon on the app homepage and click “winterize pool.” Then they can remove pHin from the pool and store it in a safe spot until next season.